Quick Answer: How Often Should A Pool Be Shocked?

What happens if you put too much chlorine in a pool?

Excess chlorine can alter the pH level of the water in the pool, making it more acidic.

The acid levels can cause any of the following symptoms: Irritant dermatitis which is a red skin rash characterized by raised itchy red bumps.

Eye irritation and over-dilated blood vessels in the eyes..

How long does it take chlorine levels to go down?

about two hoursDecrease pool chlorine with natural sunlight On a cloudless sunny day, 90% of the chlorine level in a pool can be destroyed in about two hours.

How long after shocking pool can I test water?

Turn on your pump filter system to circulate the water. Now, pour the shock/water mixture around the inside perimeter of your pool. The best time to shock is at dusk or night, and then let your pump filter system run overnight. Continue letting the pump to run for about 6 hours and then test the water.

Can I shock my pool every day?

Shocking Your Swimming Pool During The Day Shocking gets rid of chloramines and helps bring your pool’s chlorine levels to a well-balanced 3 parts per million (ppm). But while daytime is great for enjoying your pool, it’s the wrong time to shock.

Should I shock my pool when I first fill it up?

At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. … Now it’s time to keep the water hardness in check, otherwise known as alkalinity.

Can you use shock and chlorine together?

Adding chlorine besides the shock can increase the chlorine content in the water which can make the entire shocking process useless. Hence, it is better if you don’t use the shock and chlorine at the same time. The best time to add chlorine to the pool water is after you have shocked the pool.

Can too much shock make your pool cloudy?

Sometimes you’ll get cloudy pool water after shocking. This is common and should dissipate over time. Just keep your filter running and it should clear up. Also, look into a new brand of shock (make sure you buy shock that has a main active ingredient of calcium hypochlorite).

Should I backwash after shocking pool?

Backwash only as needed. Brush the pool vigorously, several times after shocking the pool. Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment.

Can I add shock and algaecide at the same time?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

How long does pool shock last?

Heavy shocking with granular chlorine will generally require 24-48 hours before the chlorine level has dropped to safe swimming levels (below 5 ppm). Lithium and Non-Chlorine shock labels typically allow immediate swimming, but check the package label, to be sure.

What happens if you go in a pool that was just shocked?

Common dangers presented in chemical shock treatments: Treatment is highly corrosive. Will cause skin and eye damage. May be fatal if swallowed. If this treatment gets in your eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes.

How long should you run filter after shocking pool?

24 hoursRun the filtration system While shocking your pool will help kill any germs any algae, it won’t actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.